DIE & MOLD - Colibri Spindles

PRODUCTS
- JET SPINDLES
- AIR BEARING SPINDLES
  - Technology
  - Product Families
RESOURCES
SUPPORT
ABOUT
CATALOG
- SWISS HIGH-SPEED SPINDLENEW
  - - - Swiss Type High-Speed Jet Spindle
        SWISS / UNIVERSAL / ULTRA HIGH-SPEED
- JET SPINDLESV2
  - - - POWER / VERSATILITY / EFFICIENCY
    - - SPEED / PRECISION / MICRO TOOLS
    - - GENERIC INTERFACE / CUSTOM ASSEMBLIES
    - - 90 DEGREES / ST20 / MODULAR
- PRO JET SPINDLESV4
  - - - POWER Jet - 4th Generation of:
        POWER / VERSATILITY / EFFICIENCY
    - - SPEED Jet - 4th Generation of:
        SPEED / PRECISION / MICRO TOOLS
    - - TR Jet - 4th Generation of:
        GENERIC INTERFACE / CUSTOM ASSEMBLIES
    - - 90 DEG - 4th Generation of:
        90 DEGREES / ST20 / MODULAR
- MICRO JETSMALL
  - - - SMALL / ACCESSABILITY / POWERFUL
    - - MICRO LINE - 00 / 45 / 60 / 90
- 90 Degree SpindlesANGLED
  - - - POWER V4 - VERSATILITY / EFFICIENCY
    - - SPEED JET - PRECISION / MICRO TOOLS
    - - SWISS - UNIVERSAL / ULTRA HIGH-SPEED
    - - MICRO 90° - SMALLEST OFFER
  - - - HPC Jet V2 - POWER / EFFICIENCY
    - - GJET V2 - PRECISION / MICRO TOOLS
- JET ACCESSORIESADD ONS
- DICING SPINDLESAIR BEARING
  - - - ULTRA-LIGHTWEIGHT AND COMPACT
    - - VERSATILE DICING APPLICATIONS
    - - LARGEST DICING SPINDLE
  - - - HEAVY-DUTY SINGULATION APPLICATIONS
    - - DEMANDING DICING AND ACCURACY
    - - EXTREMELY COMPACT
- DICING ACCESSORIESADD ONS

Home
/
DIE & MOLD

Industries

Pencil Bottle Mold

SUCCESS STORY
Client with a tool wear problem and excessive machining time. We managed to reduced tool wear, advised the customer to use specific tools for aluminum (he was using them for steel in general), significantly reduced machining time from 360 minutes to 183 minutes with a much better finish using the GJET Jet Spindle. GJET was chosen over the HPC due to the limitation on space, otherwise HPC would have been the preferred Jet Spindle for this happy customer.

SUCCESS STORY

Client with a tool wear problem and excessive machining time. We managed to reduced tool wear, advised the customer to use specific tools for aluminum (he was using them for steel in general), significantly reduced machining time from 360 minutes to 183 minutes with a much better finish using the GJET Jet Spindle. GJET was chosen over the HPC due to the limitation on space, otherwise HPC would have been the preferred Jet Spindle for this happy customer.

CASE STUDY
Industry	Die & Mold
Application	Profile Milling
Part	Electrode
Machine	HAAS VF4
Challenge	Reduce machining time and achieve an improved finish.
Solution	Applied GJET for its speed, compactibility and accuracy

RESULTS WITH GJET
Time Savings per part (minutes)	187
Cost Savings Per Part ($40/hour)	$124.67

GJet/Ultra PRO

OPERATING DATA	3D Bottle Finish		3D Slot Finish
Test Data	Machine Spindle	Jet Spindle	Machine Spindle	Jet Spindle
Spindle Speed (rpm)	10,000	25,000	10,000	24,000
Cutting Speed (VC M/min)	157	393	63	151
Depth of Cut (mm)	0.1		0.1
Width of Cut (mm)	0.07		0.07
Table Feed Vf(mm/min)	2,000	5,400	800	2,000
Machining Time (min) per part	360	183	40	30
Tool life [wear] - high, average, low	low	high	low	high
Surface Finish - high, average, low	low	high	low	high
Cycle Time Improvement (%)	49%		25%
Total Machining Time (min) per part	400		213

CONDITIONS
Coolant Pressure & Flow rate	15 bar at 10 liters per minute
Holder Type	ER32
Material & Hardness	Aluminium 6061
Cutting Tool	Ball nose endmill 5.0 mm - 2 teeth
Diameter (mm)	5.0
No. of Teeth	2

Swiss Type High-Speed Jet Spindle

Industries

Downloads

TJS-20K/30K/40K: BT30/40

Downloads

Downloads

Downloads

Contact Us For A Quote