Colibri Spindle Products
COLIBRI GENERIC INTERFACE FOR IMPLEMENTATION INTO NEW ASSEMBLIES.
The HSM Jet Spindle – GreenJET & HPC TR models are the culmination of an advanced R&D initiative in high speed spindle engineering; offering speeds from 35,000 to 55,000 rpm while the main machine spindle remains idle. It’s ideal for a wide range of semi-finishing and finishing applications using small cutting tools such as milling, drilling, thread-milling, engraving, chamfering, deburring, grinding and more.
| HSM JETSPINDLE TYPE | TJS 20K | TJS 30K | TJS 40K |
|---|---|---|---|
| Operating Range Coolant Pressure [Bar] | 20~40 | 20~40 | 20~40 |
| Operating Range Coolant Flow Rate [L/min] | 12~18 | 12~18 | 12~18 |
| Rotational Spindle Speed [Krpm]* | 30k~45k | 35k~55k | 40k~60k |
| Optimum Tool Cutting Diameter [mm] | Drilling 0.5~2.0 Milling 1.0~3.5 | Drilling 0.5~2.0 Milling 1.5~3.5 | Drilling 0.5~1.0 Milling 0.5~1.2 |
| Operational Data | TR GJET | TR HPC |
|---|---|---|
| Operating range of coolant pressure [BAR]* | 20-40 | 15-70 |
| Operating range of coolant flow rate [L/min] | 10-20 | 16-22 |
| Rotational spindle speed [Krpm]* | 35-55 | 18-45 |
| Optimum cutting tool diameter [mm] Drilling | 0.3-2.0 | 0.3-3.0 |
| Optimum cutting tool diameter [mm] Milling | 0.3-3.5 | 1.0-4.0 |
| Max output power [Kw] | 0.5 | 1.5 |
| Compatible adaptor models | FC, RC | FC, RC |
- Coolant pressure is measured from the spindle inlet
- Rotational spindle speed is based on coolant pressure and flow rate
- Spindle speed may vary up to 7%
- Contact factory for other details
TR GJET - FLANGE CLAMPING OPTION
| Designation | P/N | Adaptor | L mm | Tool d max mm | Kg |
|---|---|---|---|---|---|
| TR GJET FC | 37-025-599 | Flange Clamp | 96.00 | 6.0 | 1.20 |
TR HPC - FLANGE CLAMPING OPTION
| Designation | P/N | Adaptor | L mm | Tool d max mm | Kg |
|---|---|---|---|---|---|
| TR HPC FC | 47-055-994 | Flange Clamp | 96.00 | 6.00 | 1.80 |
TR GJET - REAR SCREW CLAMPING OPTION
| Designation | P/N | Adaptor | L mm | Tool d max mm | Kg |
|---|---|---|---|---|---|
| TR GJET RC | 37-035-995 | Rear Clamp | 105.00 | 6.0 | 1.80 |
TR HPC - REAR SCREW CLAMPING OPTION
| Designation | P/N | Adaptor | L mm | Tool d max mm | Kg |
|---|---|---|---|---|---|
| TR HPC RC | 47-055-995 | Rear Clamp | 105.00 | 6.0 | 1.00 |
